A bathtub is a great place to take a relaxing soak. A clean tub will make your experience even more enjoyable by preventing any dirt or soap scum from getting on you. But, if the tub has become filthy with mold and mildew, it can be hard to know where to start cleaning. This blog post will discuss how to clean your bathtub without using harsh chemicals thoroughly!
Why is it Important to Clean your Bathtub?
Cleanliness is next to godliness. Cleaning your bathtub will help prevent mold and mildew from growing in it, which can be dangerous for the respiratory system if inhaled. Mold and mildew also release spores that can aggravate allergies or trigger asthma symptoms. If you have children, this could affect their health as well, so make sure you clean out any hidden spots where they might play!
If you have a bathtub that has been stained from use, it’s probably because of all the soap scum that gets built up and mineral deposits. In addition to adding cleaner into your tub before taking a shower or bath, there are several other ways you can clean out those stains and buildup so your tub looks lovely again!
How often should you clean your bathtub?
Once a week is ideal for most people with busy schedules. If this doesn’t work for your schedule, aim to be consistent every few days at least. Once the grime starts building up on any surface in our home, we tend to forget about cleaning it until it becomes an emergency. Try not to let this happen to your tub!
How to prevent future buildup?
Once clean, there are several ways to ensure no stains will return anytime soon:
– To keep soap scum from returning, consider using less shower gel or shampoo when bathing so water can rinse these off quickly before they dry onto surfaces of the bathtub—getting rid of all moisture after each use is crucial as well since this provides an environment where mold and mildew love to grow.
– Apply a coat of car wax or furniture polish to the surface of your tub every few months. This will help create a barrier against any dirt, grime, or water that may try and accumulate on it in the future.
– Use a squeegee after each shower to remove excess water from the surfaces before it has time to seep in and cause problems down the line.
Following these tips should help keep your bathtub clean for longer without all the elbow grease (or harsh chemicals)! If a buildup does start to reappear over time, don’t be afraid to give one of these methods another go – eventually, you’ll find one that works best for you and becomes part of your regular cleaning routine!
Best Ways to Clean Bathtub
There are several different methods you can try when cleaning your tub. Here are a few that have worked well for many people:
– Pour boiling water onto the surface of the tub and let it sit for a few minutes to loosen any built-up dirt or grime. Use a brush (or your hands) to scrub it away, then rinse with cold water.
– Mix baking soda and vinegar into a paste, apply to the stains and let it sit for about 15 minutes before scrubbing clean. Rinse off with warm water afterward.
– Make a diluted bleach solution in a spray bottle and use that to spritz on any areas that need extra attention. Let it sit for about five minutes before rinsing off thoroughly with warm water. Beware: bleach can be harsh on some surfaces, so test this method in an inconspicuous spot first to ensure it won’t damage the surface.
– Mix together dish soap, baking soda, and water into a paste that you can use as an exfoliating scrub on any stains leftover from your previous bath or shower. You don’t need anything special for this method either! Rinse with warm water afterward, then wipe down dry to prevent future buildup in these areas.
– If you have too many stains to try and scrub away yourself, your best bet might be hiring a professional. They’ll know the right products for removing buildup or discoloration without damaging your tub’s surface either! You could also look into refinishing it if you need more help on that end.
How to Clean Bathtub?
Using Dish Soap and Bleach:
This can be done by adding one cup of each into the water, then immersing it in the tub while scrubbing the stains with an abrasive sponge or brush. Allow this mixture to sit for at least two hours before rinsing away with cold water followed by warm water. If any stains remain, repeat this process until they are gone. This combination may also remove rust particles on old grout if allowed time to soak; however, too much exposure will corrode steel fixtures within eight hours, so monitor accordingly. Afterward, flush out debris from drains using equal parts vinegar, baking soda (two cups), and boiling water (one cup).
Using Baking Soda and Vinegar:
Another method of cleaning a bathtub is to use baking soda and vinegar. This can be done by pouring half a cup each into the tub, then scrubbing with an abrasive brush or sponge before allowing it time to sit for at least ten minutes. Next, flush out debris from drains using equal parts vinegar, baking soda (two cups), and boiling water (one cup) followed by cold water. If any stains remain, repeat this process until they are gone; however, too much exposure will corrode steel fixtures within eight hours, so monitor accordingly. To protect against corrosion caused by salts in hard tap water, add one tablespoon white distilled vinegar per gallon of rinse water.
Using a Commercial Product:
A third method of cleaning a bathtub is to use a commercial product. This can be done by following the manufacturer’s directions, then rinsing away with cold water followed by warm water. If any stains remain, repeat this process until they are gone. Be sure to read the warnings and precautions on the label before using. Afterward, flush out debris from drains using equal parts vinegar, baking soda (two cups), and boiling water (one cup).
Cleaning Tips:
-Always test any cleaning solution in an inconspicuous area before applying it to the entire surface.
-Never mix bleach with other household chemicals such as ammonia agents as this could create a dangerous gas.
-If using a commercial product, be sure to read the warnings and precautions on the label before use.
-To protect against corrosion caused by salts in hard tap water, add one tablespoon white distilled vinegar per gallon of rinse water.
-After cleaning the bathtub, flush out debris from drains using equal parts vinegar, baking soda (two cups), and boiling water (one cup).
Steps on Cleaning your Bathtub
The first step to cleaning your bathtub is to remove any large chunks of dirt or debris. You can do this by scraping them off with a brush or using a vacuum cleaner with the hose attachment. If there is any caked-on soap scum or mildew, you can use a detergent to help loosen it up. Be sure to wear gloves and goggles while doing this, as the chemicals in the detergent can be harmful if they come into contact with your skin or eyes.
Once all the big pieces are gone, you can start scrubbing the tub with a soft cloth and some hot water. Make sure to get into all the nooks and crannies so that no dirt or grime remains! If there is any stubborn mildew or soap scum, you can use a more potent cleanser. Just be sure to avoid using harsh chemicals, as they can damage the finish on your bathtub.
Once the tub is clean, rinse it thoroughly with hot water and dry it off with a soft cloth. You may want to consider applying a coat of polish or sealant to protect the finish from future dirt and grime buildup. Now you can enjoy a sparkling clean bathtub without having to worry about any harmful chemicals!
Related Posts:
