Most people take baths to relax and unwind at the end of a long day. However, if your bathtub is not clean, it can have the opposite effect!
A dirty bathtub can harbor bacteria and cause skin problems. In this blog post, we will teach you how to clean your bathtub deep so you can relax in a sanitary environment.
Why is it Important to Deep Clean Your Bathtub?
It is essential to deep clean your bathtub for several reasons. First, it will remove any soap scum, mildew, or other dirt and grime built over time. This will help to keep your tub looking its best.
Deep cleaning will also help prevent any health problems that could occur if these substances are left in the tub.
Finally, deep cleaning will also make it easier to keep your tub clean in the future as it will be less likely to attract dirt and grime. For these reasons, it is well worth taking the time to deep clean your bathtub regularly.
How do you get your bathtub white again?
You can do a few things to get your bathtub white again:
- You can use a bleach-free disinfectant bathroom cleaner or a mild bleach solution and scrub the tub with a soft brush. Be sure to rinse the tub well afterward.
- You can try using a pumice stone to scrub any stubborn dirt or stains.
- You can buy a commercial cleaner specifically designed for cleaning bathtubs.
- Follow the directions on the cleaner, and be sure to rinse the tub well afterward.
What removes hard water stains from a bathtub?
There are a few things that you can use to remove hard water stains from your bathtub. You can use white vinegar, lemon juice, or baking soda. Just mix one of these ingredients with water and scrub the stains away.
You can also use commercial cleaners designed to remove hard water stains. Whichever method you choose, rinse the tub well afterward, so no residue is left behind.
How often should you clean your bathtub?
It would help if you cleaned your bathtub at least once a week. However, if you use your tub frequently, you may need to clean it more often. If you notice any dirt or grime build-up, scrub the tub with a soft brush and rinse it well afterward.
How To Deep Clean Your Bathtub?
To deep clean your bathtub, you will need:
-A stiff bristled brush
-Gloves
-Baking soda
-Vinegar
-Warm water
First, you will want to remove any soap scum or dirt on the tub’s surface. You can scrub the tub with a stiff, bristled brush and warm water.
Next, you will want to make a cleaning solution that is half bleach or disinfectant and half water. Put on gloves and use this solution to scrub down the entire tub. Be sure to pay special attention to areas that seem extra dirty.
Once you have finished scrubbing the tub, rinse it off with clean water. Then, sprinkle baking soda all over the tub. Pour vinegar into a spray bottle and spritz the baking soda. The vinegar will cause the baking soda to fizz and help loosen any dirt still clinging to the sides of the tub. Let this sit for a few minutes before scrubbing the tub.
Rinse off the tub and enjoy your clean, sanitary bathtub! Relaxing in a clean tub will be much more enjoyable now that you know it is free of dirt and bacteria. This deep cleaning method should be done monthly to maintain your tub.
Different Methods to Deep Clean
So, how do you go about deep cleaning your bathtub? There are a few different methods that you can use.
One option is to purchase a commercial cleaner specifically designed for this purpose. Alternatively, you can make your cleaner using vinegar and water. Mix equal vinegar and water in a spray bottle and use this solution to scrub down your tub.
Once you have scrubbed the tub with either a commercial cleaner or your homemade solution, rinse it thoroughly with clean water. You may also want to consider using a mildew-resistant shower curtain or liner to help keep your tub clean in the future. By following these simple steps, you can easily keep your bathtub looking its best for years to come!
Another method you can use to deep clean your bathtub is a pumice stone. A pumice stone is a small, abrasive stone found at most hardware stores. To use a pumice stone, wet it and rub it over any areas of the tub that are covered in soap scum or mildew. Be sure to rinse the tub thoroughly after using the pumice stone.
As you can see, there are several different ways that you can deep clean your bathtub. By doing this regularly, you can keep your tub looking its best for many years to come!
Natural Ways To Keep Your Bathtub Clean
White Vinegar: There are a few natural ways to clean your bathtub. One way is to use white vinegar. Vinegar is a great natural cleaner and disinfectant. You can either use it at full strength or dilute it with water.
Borax: Another way to clean your tub naturally is with borax. Borax is a natural cleaning agent that removes dirt, grime, and mold. You can either sprinkle it on the tub and scrub or make a paste with water and apply it to the affected areas. Let it sit for a few minutes before scrubbing and rinsing off.
Baking Soda: Baking soda is another natural cleaning agent used to clean your bathtub. You can make a paste with water and baking soda and apply it to the tub. Let it sit for a few minutes, then scrub before rinsing off.
Lemon: Lemon is a natural disinfectant and can be used to clean your bathtub. Use the juice or rub a lemon wedge on the affected areas. Let it sit for a few minutes before rinsing off.
These are just a few of the ways that you can clean your bathtub naturally. Vinegar, borax, baking soda, and lemon are all great options. Try out a few and see which one works best for you.
How to Clean Mold and Mildew in a Bathtub?
Mold and mildew love warm, humid environments—which is why they often appear in bathrooms. And while a bit of mold isn’t necessarily harmful, it can be unsightly and lead to health problems if it’s not removed.
Luckily, you can take a few simple steps to deep clean your bathtub and get rid of mold and mildew for good:
- Mix equal parts water and white vinegar in a spray bottle.
- Add a few drops of tea tree oil (this will help to kill the mold and mildew).
- Spray the solution onto the affected areas and let it sit for about 30 minutes.
- Use a scrub brush or sponge to remove the mold and mildew, and rinse the area with clean water.
If you don’t have white vinegar or tea tree oil on hand, you can also use a bleach solution to clean mold and mildew from your bathtub. Mix one cup of bleach with one gallon of water, and spray it onto the affected areas. Let it sit for about 30 minutes, then scrub away the mold and mildew before rinsing with clean water.
How do you get dirt and grime out of a bathtub?
If you have dirt and grime in your bathtub, there are a few different ways to get it out. One option is to use a commercial cleaner specifically designed for this purpose. Alternatively, you can make your cleaner using vinegar and water. Mix equal vinegar and water in a spray bottle and use this solution to scrub down your tub.
Another method you can use to get dirt and grime out of your bathtub is a pumice stone. A pumice stone is a small, abrasive stone found at most hardware stores. To use a pumice stone, wet it and rub it over any areas of the tub that are covered in soap scum or mildew. Be sure to rinse the tub thoroughly after using the pumice stone.
Different Types of Bathtubs
Porcelain Tub:
To deep clean a porcelain tub, you will need:
-Warm water
-Vinegar
-Baking soda
-Sponge or cloth
-Soft scrub brush (optional)
Directions:
Fill your tub with warm water and vinegar. The ratio should be one part vinegar to four parts water. Let the mixture sit in the tub for 30 minutes before proceeding to the next step.
After 30 minutes have passed, sprinkle baking soda around the entire tub. Use your sponge or cloth to scrub the baking soda into the tub’s surface. Be sure to pay extra attention to any stained or discolored areas.
Rinse away the cleaning solution with warm water. If you have any stubborn stains, you can use a soft scrub brush to remove them.
Acrylic Tub:
To deep clean an acrylic tub, you will need:
-Warm water
-Mild dish soap
-Sponge or cloth
Directions:
Fill your tub with warm water and add a squirt of mild dish soap. Use your sponge or cloth to scrub the entire surface of the tub. Be sure to pay extra attention to any stained or discolored areas.
Rinse away the cleaning solution with warm water. If you have any stubborn stains, you can use a soft scrub brush to remove them. Acrylic tubs are also susceptible to scratches, so be careful not to scrub too harshly.
Fiberglass Tub:
To deep clean a fiberglass tub, you will need:
-Warm water
-Mild dish soap
-Sponge or cloth
-Soft scrub brush (optional)
-Baking soda (optional)
Directions:
Fill your tub with warm water and add a squirt of mild dish soap. Use your sponge or cloth to scrub the entire surface of the tub. Be sure to pay extra attention to any stained or discolored areas. If you have any stubborn stains, you can use a soft scrub brush to remove them.
Rinse away the cleaning solution with warm water. You can also sprinkle baking soda on stubborn stains and scrub them with a soft brush before rinsing. You may also want to run the exhaust fan or open a window to help ventilate the room while cleaning.
Different bathtubs require different methods of deep cleaning to achieve the best results. No matter what type of tub you have, rinse it well after cleaning to remove any residual soap or cleaner.
For the best result, here is the disinfectant bleach-free spray that we recommend to ensure to deep clean your bathtub in the safest method.
If you need help cleaning your bathroom, NW Maids is here to help. We are a professional cleaning company that offers bathroom cleaning. Our team of experienced maids will leave your bathroom sparkling clean from top to bottom—guaranteed! Schedule a free estimate today.
We look forward to hearing from you soon!
Related Posts:
- Clean Your Stainless Steel Appliances With Ease
- How To Deep Clean Your Fridge with These Simple Steps
- The definitive spring cleaning guide (with printable checklist)
- How to Clean Different Types of Tiled Floors
← Get Your Shoes Looking Brand New With These Tips
Cleaning Tips for Laminate Flooring: Maintain Its Durability →
