The renovation creates excitement and cleaning challenges because of the dust, construction debris, and interruptions.
Homeowners must maintain cleanliness in all renovation projects, from one-room improvements to complete house remodels, because it helps reduce stress and preserve living comfort.
Here is a method for keeping your house clean during renovations.
Step-by-Step Guide to Renovation Cleaning
Here are the essential cleanup steps to follow during renovation to maintain a safe and tidy space.
1. Set Up Protective Barriers
Before starting any work, a protective barrier must be established between the construction site and the rest of the house. The barrier will prevent construction materials from spreading throughout the house.
Plastic Sheets or Drop Cloths: Plastic sheets or drop cloths should be installed to seal off rooms through doorways. This can minimize the amount of dust that spreads through the area.
Temporary Walls: Large-scale renovations should use partition walls to define areas where construction work takes place.
Installing these physical barriers marks the beginning of maintaining cleanliness through the renovation period.
2. Create a Cleaning Schedule
A cleaning schedule becomes essential for stopping messes from accumulating. Delaying cleaning until the project completion might result in additional work and increased frustration.
Daily Cleanups: Daily time allocations should include sweeping and surface wiping in areas where multiple people gather.
Wipe Surfaces Frequently: Wiping surfaces with a microfiber cloth should occur frequently because debris piles up quickly. You must use a microfiber cloth to clean surfaces such as countertops, shelves, and other flat areas every workday.
Vacuum Regularly: HEPA filtration vacuums are a good choice because they efficiently trap small dust particles. Regular vacuuming should focus on busy paths and areas near the work zone.
Regular cleaning operations will keep the situation under control.
3. Protect Furniture and Belongings
The renovation exposes your household furniture and personal items to dust accumulation and potential damage. Proper protection of these items is required for long-term cleanliness.
Use Furniture Covers: Furniture should be protected with plastic covers or old sheets to prevent dust and debris from reaching it.
Store Valuables Elsewhere: Valuable items must be placed in different areas of the home or rented storage units until the renovation work is finished.
The smaller number of items exposed to the work zone will result in simpler cleaning operations.
4. Keep the Work Area Tidy
Maintaining a clean work area is equally important to the final renovation outcome. A lack of proper organization allows clutter to develop rapidly, creating cleaning challenges for the future.
Designate a Cleaning Crew: Every renovation project needs a designated cleaning crew when members perform the work. The cleaning team should remove all scrap materials, dispose of debris, and organize all tools.
Dispose of Waste Immediately: Your priority should be the immediate removal of construction waste, including broken materials and packaging. A specific waste receptacle or dumpster should be used to stop the work area from becoming overwhelmed with debris.
5. Use Air Purifiers
The renovation process creates excessive fine dust, which produces an uncomfortable thickness in the air. Installing air purifiers proves to be an efficient solution for maintaining home air quality during the renovation work.
Invest in a HEPA Filter: A HEPA filter is an effective solution because it traps particles measuring 0.3 microns and smaller, including dust, pollen, and mold spores.
Place Purifiers Strategically: Position air purifiers in the rooms where renovation activities take place. Each room should have an air purifier installed to enhance air quality throughout the entire house.
6. Implement a Mudroom or Entry Area
The continuous flow of contractors, tools, and materials through your home demands a designated entry point where everyone must leave their dirty footwear and equipment before entering the clean sections of your home.
Install a Shoe Rack or Mat: A shoe rack placed at the door entrance will influence family members and employees to take off their shoes when they enter other areas of the house.
Create a Tool Station: A tool station should be established for organizing tools, and the storage space should prevent sawdust and dirt from entering the rest of the house.
Dust and debris will be kept out of the house by using specific entry and exit zones as barriers.
7. Focus on Cleaning After the Big Tasks
Once major construction activities like dry wall installation or demolition are completed, it’s time for a deep clean. These activities tend to produce the most dust, so cleaning the home thoroughly afterward is essential.
Begin with the Floors: Sweep, vacuum, and mop all floors in every area of the house. Pay special attention to the corners, baseboards, and under furniture, as these areas tend to collect dust.
Wipe Down All Surfaces: Dusting and wiping down surfaces, including lighting fixtures, furniture, and walls, should be a priority after the major construction tasks are done.
Don’t Forget the Vents: HVAC vents gather dust fast. A microfiber cloth or vacuum attachment is recommended for cleaning these surfaces.
Clean and refresh your house after the construction dust settles to restore your home to its original state.
8. Keep Track of Dust Sources
Renovations produce large amounts of dust, but the majority of the dust comes from different sources. Activities like sanding and cutting generate substantial dust, unlike painting, which produces minimal dust particles.
Dust Barriers for High-Dust Activities: Dust barriers must be installed in areas where high-dust activities take place to contain dust during sanding and grinding operations. Regular cleaning needs to happen more frequently in these areas.
Cover Ventilation Systems: Ventilation ducts and registers must be closed to stop dust from entering your HVAC system, which would then distribute dust throughout your home.
9. Keep Your Home Well-Ventilated
Proper ventilation will improve the air quality in your house by removing fumes and dust. Open windows whenever possible and use exhaust fans to improve air circulation.
Cross-Ventilation: For better airflow, open windows on opposite walls of the house. Cross-ventilation can minimize dust accumulation while enhancing air quality.
Exhaust Fans in High-Dust Areas: Kitchen and bathroom fans must be operational to remove debris and fumes from these areas.
Proper ventilation offers an effortless method to maintain clean air quality in your house during renovation.
10. Call in Professional Help When Needed
Home renovations are challenging because the mess can sometimes become too much to handle.
If you need help with cleaning during the renovation process, you can hire professional cleaning services.
Professional deep cleaning services can tackle difficult-to-reach areas, so your house stays spotless even when under renovation.
NW Maids provides housecleaning services for people who need professional cleaning assistance.
Our professional staff will help you keep your home clean throughout your renovation.
Keep Your House Clean Through Every Stage of Construction
Home renovation does not need to result in a dirty house.
By setting up protective barriers, creating a cleaning schedule, and utilizing tools like air purifiers and effective cleaning products, you can maintain a cleaner, more organized environment throughout the process.
Proper planning and consistent effort enable homeowners to benefit from renovated homes and tidy living areas.
Related Posts:
- Top Cleaning Issues in Coastal Homes (and How to Fix Them)
- Best Way to Wash and Sanitize Reusable Shopping Bags
- The Benefits of a Cleaning Service for Elderly Loved Ones
- How to Achieve a Clean, Clutter-Free Home Office
