A water dispenser is a useful appliance that helps get hot and cold water quickly.

Over time, mineral deposits, mold, and bacteria can build up, affecting the taste of your water.

It is important to clean your dispenser to make it safe to use. Follow these steps to keep a clean and good working unit.

Materials Needed for the Task

First, let’s get all the things that are required for the task to be done.

You will need white vinegar or unscented bleach, warm water, a sponge, a microfiber cloth, a small brush, and dish soap that is mild.

A bucket or a similar container is also helpful for removing excess water.

Safety Precautions When Unplugging the Dispenser

This is because electrical hazards are always present, and it is always safe to disconnect the unit from the power source.

If your dispenser has a cooling system, it is recommended that you do not attempt to clean it when it is still hot but rather when it has cooled down to room temperature.

Remove Any Water That May Be Left in the System

To empty the reservoir, push the buttons that dispense hot and cold water until the tank is empty of water.

Some models have a drainage plug at the back, which, when removed, will allow water to flow out.

Take Off Any Parts That Can Be Removed Easily

Take off any parts that can be detached, such as the water bottle, drip tray, and nozzle.

These pieces should be washed separately in warm water and mild soap.

Rinse well to remove soapy water.

Wipe the Outside of the Device

Wipe the exterior of the dispenser with a cloth dampened with water and mild detergent.

The areas most likely to be touched should also be cleaned, including the buttons and the spouts.

Gently scrub away stubborn stains using a soft-bristled brush.

Disinfect the Reservoir

Get a solution of one tablespoon of bleach or two cups of white vinegar in one gallon of water.

Put this solution in the reservoir and leave it for about 10 minutes.

This process kills bacteria and mineral deposits.

Clean the Inside of the Reservoir with a Brush

Using a brush or sponge, clean the inside of the reservoir and reach into all the cracks and corners.

This step guarantees that any loose material is removed as completely as possible.

Work carefully but gently to prevent damage to the inside.

Rinse the System Thoroughly

After disinfecting, you must ensure all the cleaning solution has been drained from the dispenser.

Then, fill the reservoir with clean water and run it through the system more than two times to rinse off any chemicals that may still be remaining in the dispenser.

If you still get a strong smell of vinegar or bleach, then do this step again.

Clean the Water Spouts

This area is often touched, making it prone to dirt and bacteria contamination.

Use a small brush to clean these areas with the cleaning solution, and do it gently.

Use fresh water to rinse it to avoid spreading contamination.

Dry and Wipe All the Pieces

When all the parts are cleaned and rinsed, dry them with a cloth.

Make sure that no moisture is left in any part, as this can lead to the growth of molds.

Reassemble the Dispenser

When the parts are dry, replace all the parts, such as the water bottle and drip tray.

Make sure that all of the pieces are well installed and that there is power to the unit before placing it back into use.

Connect the Dispenser and Check if It is Working Properly

Connect the dispenser to the power source and let it cool or heat up as required.

Get a few cups of water from the system and check if it is working properly and if any residue of the cleaning product is left behind.

How Often to Clean Your Water Dispenser

When it comes to cleaning, it is recommended that you do it every four to six weeks.

This helps prevent mineral deposits, mold, and bacteria, ensuring safe drinking water.

Besides regular cleaning, it is also advisable to check on the dispenser for any signs of leakage or damage that may affect its efficiency of the dispenser.

If you smell some strange odor or the water tastes differently, it may require a thorough cleaning. It is advisable to keep a log of the cleaning dates to ensure that the appliance is cleaned regularly.

Taking care of your dispenser will increase its life and the taste of your water.

Conclusion

Having a clean water dispenser will help to get cool and crisp water.

By following these guidelines, you can keep your appliance clean and healthy.

Eco-Friendly Move-In Cleaning →